Alpha Technologies APB HFC Voltage Booster - Manual (Page 6)

016-559-B0-001 Rev. A 6
Safety Notes
Review the drawings and illustrations contained in this manual before proceeding. If there are any questions
regarding the safe installation or operation of this product, contact Alpha Technologies or the nearest Alpha
representative. Save this document for future reference.
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this manual. Where these symbols appear, use extra care and
attention.
The use of ATTENTION indicates specifi c regulatory/code requirements that may affect the placement of
equipment and/or installation procedures.
ATTENTION:
A NOTE provides additional information to help complete a specifi c task or procedure.
NOTE:
The use of CAUTION indicates safety information intended to PREVENT DAMAGE to material or
equipment.
CAUTION!
WARNING presents safety information to PREVENT INJURY OR DEATH to the technician
or user.
WARNING!
Safety Precautions
• Only qualifi ed personnel may service the APB Voltage Booster.
• Verify the voltage requirements of the equipment to be protected (load), the AC input voltage to the voltage
booster (line), and the output voltage of the system prior to installation.
• When connecting the load, DO NOT exceed the output rating of the voltage booster.
• Always use proper lifting techniques whenever handling units.
• Avoid using uninsulated tools or other conductive materials when working inside the enclosure.
• Remove all rings, watches and other jewelry before servicing voltage booster.