Alpha Technologies PME Series User Manual

Page 17

031-161-B0-006, Rev. F

2.0 Installation,

continued

2.1 Pole-mounting,

continued

2.1.1 Wooden Pole, continued

5. Secure the brackets to the pole using the 5/8" (15.9mm) machine bolts, washers,

and nuts.

6. Lift the enclosure onto the brackets. It might be necessary to rock and pull the

enclosure to properly seat it on the brackets.

7. Secure the enclosure to the brackets using the 3/8" x 3/4" (9.5mm x 19mm) hex

bolts.

8. Make sure all nuts and bolts are fully tightened and the fl anges of the brackets seat

in the wood.

9. The enclosure is now ready for the utility connection, power module, and batteries.

Fig. 2-1, PWE/PME Series Wooden Pole Mounting

Cable Power Out

Upper Mounting Bracket

Chassis Ground

Utility Power In

(with BBX)

Lower Mounting

Bracket

18" (457.2mm)

Nuts & Washers

PWE-3

5/8" (15.9mm) Bolts