Alpha Technologies CFR Intelligent Interface Device - Manual (Page 44)

Press CLEAR to return to the DEFAULT screen. Press CLEAR to return to the DEFAULT screen. Press CLEAR to return to the DEFAULT screen. Press CLEAR to return to the DEFAULT screen. Press CLEAR to return to the DEFAULT screen.
Note the ARROW keys are now illuminated along with the display. Note the ARROW keys are now illuminated along with the display. Note the ARROW keys are now illuminated along with the display. Note the ARROW keys are now illuminated along with the display. Note the ARROW keys are now illuminated along with the display.
Front Panel Screens
The LCD display used on the Intelligent Interface Device provides vital
UPS status information. Screens are displayed, one at a time, by pressing
the ARROW keys on the front panel keypad. Main screens (menus) are
linearly sequenced (see next page), starting with the Alpha Technologies
(TIME and DATE) default screen. Once the OPENING MENU is displayed,
options within the screen allow you to select specific parameter screens.
Information is displayed for 2 minutes, before the unit returns to the default
screen.
RJ-11 Connector
5 4 3 2 1
9 8 7 6
1. INTRODUCTION 5. COMMUNICATION INTERFACE OPTIONS
37 37 37 37 37 4
OPENING MENU OPENING MENU OPENING MENU OPENING MENU OPENING MENU
SYSTEM PARAMETERS
LINE PRESENT LINE PRESENT LINE PRESENT LINE PRESENT LINE PRESENT
LINE FAILURE
LOW BATTERY
WARNING
SHUTDOWN
SERVICE
ALPHA TECHNOLOGIES ALPHA TECHNOLOGIES ALPHA TECHNOLOGIES ALPHA TECHNOLOGIES ALPHA TECHNOLOGIES
05-07-93 08:03:20
LINE PRESENT LINE PRESENT LINE PRESENT LINE PRESENT LINE PRESENT
LINE FAILURE
LOW BATTERY
WARNING
SHUTDOWN
SERVICE
Initial display before a keypress
RS-232 Connections
Communication Pinouts