Cla-Val 750-60 - Manual (Page 19)

Maximum Operating Pressure Ball Check Models:
Steel 5,000 psig
Brass 2,000 psig
Piston Check Models:
Brass 2,000 psig
Temperature Range -20˚F to + 212˚F
Materials:
Body 12L14 Steel or ASTM B16 Brass
Piston Assembly Stainless steel with Buna-N O-ring
Ball Stainless steel (See note 1)
Spring Stainless steel
Stem Stainless steel
Knob Aluminum on 1/8-1/2 sizes, Brass on 3/4 to 1"
Check Plug Steel or Brass
Chamber Steel
Set Screw
Steel (black oxide)
Lock Nut Brass
Stem Packing Buna-N O-ring with "Teflon" backup
CV Factor See ordering information
Stem Taper 8˚
Stem Pitch 40 Threads/Inch on 1/8, 1/4, 3/8
and 1/2" sizes
24 Threads/Inch on 3/4 and 1" sizes
FLOW CONTROLS
KLF SERIES
FEATURES
ORDERING
INFORMATION
SPECIFICATIONS PERFORMANCE CURVES
Designed for the precise control of hydraulic and pneumatic
actuators. Provides metered flow in one direction and free-flow in
the reverse direction.
Accurate
• Precision-machined long tapered stem with fine
threading provides exact control.
• Lock nut included to secure flow setting.
• Soft-seat piston check for leak-free service.
Durable
• Optional ball check for high cycle applications.
• Rugged, all-metal construction - no plastic parts.
• Steel valves are zinc-plated and sealed with "golden glow"
chromate for double corrosion protection.
CLA-VAL
Copyright Cla-Val 2005 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
©
PART NUMBER
P
(NPT)
Female
D
(In.)
Hex
L
(In.)
G
(In.)
E
(In.)
Max
Orifice
Diam.
(In.)
Cv
(Free flow
direction)
Cv
(Controlled
flow direction)
Cracking
Pressure
(PSIG)
BRASS STEEL 316SST
KLF125B(2)(1) - KLF125SS6V(3) 1/8 11/16 9/32 1 3/4 1 1/4 .156 .32 .23 1 1/2
KLF250B(1) KLF125SBC KLF250SS6V(3) 1/4 7/8 5/16 2 3/8 1 1/4 .156 .70 .44 1 1/2
KLF375B(1) KLF375SBC 3/8 1 1/16 11/32 2 3/4 1 3/8 .265 1.14 .90 2
KLF500B(1) KLF500SBC 1/2 1 5/16 3/8 3 3/16 1 3/8 .281 1.74 1.32 3
KLF750B(1) KLF750SBC 3/4 1 5/8 15/32 3 9/16 1 7/8 .343 2.91 2.02 4
KLF1000B - 1 1 7/8 15/32 3 9/16 1 7/8 .343 2.91 2.02 4
(1) For stainless steel ball check style-designate with suffix "BC" after Part No.
(Not available on 1" size).
(2) Available with Viton soft-seat ball check-designate Part No. KLF125BBC-2
(For air service up to 125 psi only).
(3) Body, chamber & piston 316SST. All seals Viton.
PL- RCVHP (R-5/05)