Cla-Val CPC - Manual (Page 4)

Installation Instructions
3. The CPC should be mounted in the vertical position.
4. All installation, adjustment and maintenance should be carried out by a competent electrician.
5. Do not exceed the maximum ratings given in the specifications and printed on the label.
6. The electrical connections should be made as described in the user’s manual.
7. Before any maintenance operation the main power should be turned off.
Do not attempt to open the product as this will invalidate the warranty!
Software / Firmware Updates
For Software updates please visit our web site at www.cla-val.com :
1. Select "Actuators and Controls" to find the latest Software (PC) & Firmware (actuator internal software) updates.
2. Follow instructions to download automatically.
3. All the software is multi-language. Only the installation Software is in French or English.
Firmware Update (Actuator internal Software)
1. Before updating the Firmware, save program to laptop.
2. Connect the USB cable to the USB connection on laptop.
3. Connect the CPC to the USB cable.
4. Select "Read Parameters" to read CPC settings and record output parameters.
5. Select "Firmware update" in "Parameters".
6. Open the corresponding ".hex" file.
7. Select "Read Parameters" to check that the Firmware has been updated.
Page 4