Extron Electronics VN-QUANTUM User Guide - Manual (Page 56)

Section 2: Hardware Overview VN-QUANTUM User Guide
Page 56 I455GB issue 8
2-Channel DVI Input Card (ES3314)
The ES3314 Input Card allows external digital video or graphics sources to be used by the VN-
QUANTUM Processor.
Each ES3314 card has 2 source inputs. Full auto-detection is provided on each input, allowing a wide
range of standard source types to be connected without the need for any further configuration.
The maximum number of ES3314 cards that can be installed is limited only by the number of available
card slots (see table on page 57). With the minimum of one Output Card fitted:
The ES3301-2 Card Frame can accommodate up to 14 Input Cards,
allowing a maximum of 28 RGB/HD source inputs.
The ES3302 & 3304 Card Frame can accommodate up to 7 Input Cards,
allowing a maximum of 14 video source inputs.
For full technical details on the ES3314 card, see page 102.
2-Channel Output Card (ES3310)
The ES3310 Output Card provides the final output to a target display. The Card composites all
sources to be displayed into a layout defined by the VN-COMMANDER software.
The ES3310 card has two output channels, each being capable of driving a ‘standalone’ display
device or one screen element in a larger ‘tiled’ display (e.g. a videowall).
The output signal format can be either analog (RGB) or digital (DVI) format, up to UXGA resolution,
and up to 60Hz refresh rate.
The maximum number of ES3310 cards that can be installed is limited only by the number of available
card slots (see table on page 57). With the minimum of one Input Card fitted:
The ES3301-2 Card Frame can accommodate up to 14 Output Cards,
allowing a maximum of 28 display outputs.
The ES3302 & 3304 Card Frame can accommodate up to 7 Output Cards,
allowing a maximum of 14 display outputs.
For full technical details on the ES3310 card, see page 98.