Extron Electronics VSW 2VGA A User Guide - Manual (Page 33)

VSW 2VGA A • Specifications, Part Numbers, and Accessories A-3
Sync
Input type ....................................... RGBHV, RGBS, RGsB*, RsGsBs*, bi-level
and tri-level (HDTV) component video
sync
Output type .................................... RGBHV, RGBS, RGsB*, RsGsBs*, bi-level
and tri-level (HDTV) component video
sync (follows input)
Input level ...................................... 1.8 V to 5.0 Vp-p
Output level ................................... TTL: 5.0 V p-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 50 ohms
Max. input voltage ........................ 5.0 Vp-p
Max. rise/fall time ........................ 40 ns
Polarity............................................ Positive or negative (follows input)
Audio
Gain ................................................. Unbalanced output: 0 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.002% @ 1 kHz at nominal level (-10 dBV)
S/N .................................................. 94 dB at maximum output (unweighted)
Crosstalk ......................................... -50 dB @ 20 kHz, -75 dB @ 1 kHz and
below 60 Hz
Stereo channel separation ............ 96 dB @ 1 kHz
Audio input
Number/signal type ..................... 2 stereo, unbalanced
Connectors ..................................... (2) 3.5 mm mini audio jacks (tip, ring,
sleeve)
Impedance ...................................... 22k ohms unbalanced, AC coupled
Nominal level ................................ -10 dBV (316 mVrms)
Maximum level .............................. +9 dBV, (unbalanced) at 1% THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ..................... 1 stereo, unbalanced
Connectors ..................................... (1) 3.5 mm mini audio jack (tip, ring,
sleeve)