Extron Electronics PS 124 - Manual (Page 8)

PS 124 12 VDC, 4 Amp Power Supply • Installation Manual
PS 124, cont’d
2
Input Power
Apply power to the PS 124 using the supplied IEC power cord
(
b ) or by installing the optional Flexible Conduit Adapter Kit
(Extron part #70-228-02) (
c
).
b
IEC connector/power supply — Plug the IEC cord into this
connector and a 100–240 VAC source.
-OR-
c
Optional conduit adapter plate — The IEC connector and
adapter plate can be replaced by this half-inch conduit EMT
(Electrical Metallic Tubing) adapter plate, as shown in figure 2.
See “Input power — using the Flexible Conduit Adapter Kit,”
on page 4.
N With the installation of the Flexible Conduit Adapter kit,
the PS 124 is suitable for use in air handling spaces and
meets all applicable requirements of UL 2043.
OUTPUTS
RED-
OVERLOAD
12 VDC TOTAL OUTPUT 4A
100-240 50-60Hz 1.2A MAX.
OUTPUTS
RED-
OVERLOAD
12 VDC TOTAL OUTPUT 4A
100-240 50-60Hz 1.2A MAX.
Extron
PS 124
12 VDC 4 A Power Supply
1 2 3 4 5 6 7 8
For plenum applications replace
this plate with optional flex conduit
kit, part #70-228-02.
Figure 2 — Using the conduit option