Extron Electronics TP Receivers User Guide - Manual (Page 15)

TP Receivers • Installation and Operation 2-3
N The following transmitters are compatible with the
TP R 15HD A, TP R BNC A and TP R BNC AV
receivers:
TP T 15HD 45, TP T A 45,
TP T 15HD A, TP T 15HD AV,
N All TP transmitters include a 15 V or 12 V external
power supply. The transmitters (with the exception of
the TP T 15HD 45 and TP T A 45) also receive power
from the associated Extron TP receiver(s) (with the
exception of the TP R 15HD A) via the TP cable. Extron
recommends using the local power supply; however, the
power supply may not be necessary in some applications.
Use the following guidelines:
• The TP T 15HD A and TP T 15HD AV may not
require a local power supply for cable lengths of
300 feet or less.
• All of the following transmitters require the local
power supply:

TP T BNC DA4

TP T 15HD 45

TP T A 45

VTT001

Any transmitter connected to a TP R 15HD A
If problems are encountered, such as a missing or poor
quality image on the output, use the local power supply.
See
Troubleshooting, on page 2-21 for other indications
that may require using the local power supply.
9
Adjust the picture controls on the transmitter(s) and the
receiver. See Front Panel Controls and Indicators in this
chapter and refer to the TP Transmitters Family User’s
Manual , part #68-546-03.