Extron Electronics IPL T CR48 - Manual (Page 38)

Command/r
esponse table for SIS commands (continued)
Command
ASCII (T
elnet)
URL Encoded (W
eb)
Response
Reset (Zap)/Erase Commands
Erase user
-supplied W
eb page or
file
24 28
E
filename
EF
}
W
filename
EF
|
Del•
filename
]
Erase flash memory
24
E
ZFFF
}
WZFFF
|
Zpf
]
Reset all device settings to factory
24
E
ZXXX
}
WZXXX
|
Zpx
]
Absolute system r
eset, but r
etain
IP
24
E
ZY
}
WZY
|
Zpy
]
NOTE:
This command is the same as the ZQQQ command except that it excludes IP settings such as IP addr
ess, subnet mask, gateway IP addr
ess, unit name, DHCP setting,
and port mapping (T
elnet/W
eb/dir
ect access) in or
der to pr
eserve communication with the device. This r
eset is r
ecommended after a firmwar
e update. It also erases
the files ystem and passwor
ds.
Absolute system r
eset
24
E
ZQQQ
}
WZQQQ
|
Zpq
]
NOTE:
This command r
esets all settings/memories. The ZQQQ command r
esets everything (all settings, adjustments, the IP addr
ess, and subnet mask) to the factory
default values. Files in flash memory ar
e also erased by this command. The firmwar
e version does not change. The IP addr
ess is r
eset to 192.168.254.254 and the
subnet mask is r
eset to 255.255.0.0.
IPL T CR48 • Communication and Control 32