Extron Electronics FOXBOX SR HDMI User Guide - Manual (Page 22)

Size selection
The Size selection allow you to adjust the horizontal and vertical size of the output. Rotate
the Adjust
[ knob while this submenu is active to size the image horizontally and the
Adjust { to size the image vertically.
Brightness and Contrast selection
Rotate the Adjust [ knob while this submenu is active to increase and decrease the image
brightness, from 0 through 255. Rotate the Adjust { to increase and decrease the image
contrast, from 0 through 255.
Detail selection
Rotate either Adjust knob while this submenu is active to increase and decrease the detail
filter, from 0 through 127.
User Presets submenu
Figure 18 shows an overview of the User Presets submenu and the available selections.
Menu
No
menu
display
Menu
Enter
Timeout
Timeout
AUTO IMAGE RECALL
CLEAR
SAVE
EXTRON ELECTRONICS FOXBOX SR HDMI
PICTURE CONTROLS
OUTPUT
CONFIGURATION
ADVANCED
CONFIGURATION
1
1
1
USER PRESETS
Timeout
Timeout
Figure 18. User Presets Submenu Flowchart
User presets are saved in nonvolatile memory; when the receiver is powered down and later
powered back up, the settings are available for selection. Saving the settings to a preset
overwrites the settings previously written to that preset.
NOTE: The User Preset is tailored for the selected output rate. If you change the output
rate and then recall a preset that was saved for a different rate, the preset
adjustments have no effect on the video output. If, however, you then change to
the rate for which the preset was saved, the effects of the adjustments appear
on the screen.
Recall submenu
Rotate either Adjust knob while this submenu is active to select a preset number, from
1 through 30, and press the Enter button to recall the selected preset to be the current
settings. Allow the screen to timeout without pressing the Enter button to exit without
recalling the settings.
FOXBOX SR HDMI • Operation 16