Extron Electronics FOXBOX SR HDMI User Guide - Manual (Page 18)

Operation
This sections details the installation of the FOXBOX SR HDMI, including:
• Front Panel Indications and Controls
• Operation
Front Panel Indications and Controls
The receiver has front panel LEDs that indicate power and signal status (see figure 13) and a
menu system that is operated using the front panel controls and displayed on the connected
output device.
FOXBOX SR HDMI
AUDIO HDCP VIDEO CONFIG
MENU ENTER
ADJUST
2 5 1 3 4
Figure 13. FOXBOX SR HDMI Front Panel Indications and Controls
a
Power LED — T his LED lights to indicate that power is applied to the unit .
b
Signal indicators —
Video LED — This LED lights when the receiver accepts a video signal on the fiber
optic input.
HDCP LED — This LED lights when the output signal is HDCP encrypted.
Audio LED — This LED lights on the receiver when the transmitter detects an audio
signal above a –35 dB minimum threshold. It returns to unlit if the audio signal drops
below the threshold for 10 seconds.
c
Menu button — The Menu button enters the main menu system of the receiver and
backs out of the currently active submenu or selection.
NOTE: See “ Menu and Submenus ” on page 14 for the detailed menu system
interoperability of the Menu button, Enter button ( d ), and Adjust knobs
( e ). The menu system is displayed on the connected video output device
(see figure 14 on the next page).
d
Enter button — The Enter button selects and deselects a highlighted submenu or
function in the receiver main menu system and saves a changed value.
e
Adjust [ (horizontal) and Adjust { (vertical) knobs — The Adjust [ and
Adjust { knobs change settings when used in conjunction with the menu system.
FOXBOX SR HDMI • Operation 12