Changing tx channel labels, Status tab, Device information – Extron Electronics Dante Controller User Manual
Page 38: Dante information, Mute status, Device view > status tab
Dante Controller User Guide
Copyright © 2013 Audinate Pty Ltd. All rights reserved.
-38-
Changing Tx channel labels
To change a Tx channel label double click on the label and type in a new one. Tx channel labels must be
unique on a single device.
Status Tab
The Status tab is used to obtain current information about a Dante device.
The tab is divided into sections. The information presented on this tab can be very useful when
investigating networking or clocking issues in the system. The Refresh button
can be used to update
this information if required.
Note: Not all Dante devices support the display of all of this information.
Device Information
This provides the following general information about the device:
n
Manufacturer: The name of the device manufacturer.
n
Product Type: The type of device.
n
Product Version: The product version.
Dante Information
This provides Dante-specific information about the device: