Extron Electronics DDS 402 - Manual (Page 48)

Digital Display Scaler • Reference Information A-2
Reference Information
Specifications
Video input
Number/signal type ................... 1 RGBHV, RGBS, RGsB
1 RGBHV, RGBS, RGsB, component video
Connectors ................................... (1) 15-pin HD female
5 BNC female
Nominal level ............................... 1 Vp-p for Y of component video
0.7 Vp-p for RGBfor R-Y and B-Y of component video
Minimum/maximum levels ....... Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency
RGB .................................... Autoscan 24 kHz to 100 kHz
Video ................................. PAL/NTSC 3.38/NTSC 4.43/SECAM
Vertical frequency ....................... Autoscan 50 Hz to 120 Hz
Resolution range .......................... Autoscan 560 x 384 to 1600 x 1200
Video processing
Digital sampling ........................... 24 bit, 8 bits per color; 140 MHz standard, 200 MHz zoom
Colors ............................................ 16.8 million
Horizontal filtering ...................... 4 levels
Vertical filtering ........................... 8 levels
Video output
Number/signal type ................... 2 identical outputs:
1 RGBHV, HD component (Y, R-Y, B-Y) (on 15-pin HD)
1 RGBHV, RGBS, HD component (Y, R-Y, B-Y) (on BNCs)
Connectors ................................... (1) 15-pin HD female
6 BNC female
(1) 15-pin HD female (buffered local monitor output)
Nominal level ............................... 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ....... 0.0 V to 1.0 Vp-p
Impedance .................................... 75 ohms
Scaled VGA resolution ................ 640x480, 800x600, 832x624, 848x480, 852x480, 1024x768, 1280x768, 1280x1024,
1360x765, 1360x1024, 1400x1050, 576p, 720p, 1080p, and 1080i
DC offset ....................................... ±50 mV (max) with input at 0 offset
(for R, G, B, and for Y of component video)
350 ± 25 mV (max) with input at 0 offset (for R-Y, B-Y of component video)
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0.0 V to 5.0 Vp-p
Output level .................................. 0.0 V to 5.0 Vp-p
Input impedance .......................... 75 ohms
Output impedance ....................... 510 ohms
Max input voltage ........................ 5.0 Vp-p
Polarity .......................................... RGBS: negative
RGBHV: user-selectable