Extron Electronics DDS 402 - Manual (Page 40)

Programmer’s Guide, cont’d
Digital Display Scaler • Programmer’s Guide 4-8
Command/response table for SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to scaler) (scaler to host)
Test pattern
Select test pattern X14 J Tst X14 Select a test pattern.
View test pattern J X14 Show the test pattern.
Example: J 0 Test pattern is off.
Memory presets
Save current settings as a preset X15
,
Spr X15 Command character is comma.
Recall a preset X15
.
Rpr X15 Command character is period.
Firmware version, part number & information requests
Query firmware version number Q x.xx Show the controller firmware
version.
Request part number N 60-426-01 Show the DDS 402’s part #.
Request general information I (See below) Show the DDS 402’s status.
Vid X1 •Hrt X16 •Vrt X16 •Std X17 •Prennn
In the response, the “Pre” field consists of three digits, each of which represents one of the three user
presets. A one (1) in a digit indicates that a preset is saved to that location, a zero (0) indicates that
no preset is saved to that location.
Zap (reset to default settings)
Zap all DDS 402 settings Esc zXXX Zpx Reset everything: all settings,
and adjustments to the factory
defaults.