Extron Electronics AVTrac (482) User Guide - Manual (Page 8)

Kit Contents
Box 1
The AVTrac Kit is shipped in three boxes.
• Box 1 contains the connectivity, conduit and accessory components.
• Boxes 2 and 3 contain the track and ramp components.
Check the contents of each box to ensure all items are present.
Installation Guide (1)
Connectivity Box (1)
End Ramps (2)
Pre-wired
AC Power
Flex Conduit (1)
AC Power Module (1)
Cover AAP Plate for
AC Power Module (1)
5/32” Masonry Bit (1) and
3/16” Masonry Screws (20)
Double-sided Tape (1 roll)
Rubber Strip (1)
(model #42-156-24A only)
Checklist for contents of box 1
† Connectivity box (1) with 6/32 inch nut (1) to secure AC power module
† AC power module (1) prewired with 24 feet (7.32 m) oval flex conduit
† 9.35 inches (23.7 cm) quarter-circle end ramps (2)
† Cover AAP plate for AC power module (1)
† Double-sided adhesive tape (1 roll of 15 feet) for rubber inlay strip
† 3/16 inch masonry screws (20)
† 5/32 inch masonry drill bit (1)
† Installation guide (1)
† 8 feet (2.44 m) rubber strip (1) — model number 42-156-24A only
AVTrac • Kit Contents 2