Xylem VARIO WATERPROOF PH METER - Manual (Page 29)

VARIO pH Operation
29 ba75373e04 07/2006
4.5 Saving
The VARIO pH meter has a data memory. It can store up to 50 measurement
datasets, depending on the short pH electrode or DIN adapter connected.
A dataset consists of:
z Main measured value (pH measured value or mV measured value)
z
Measured temperature value
z Time and date
z
ID number (0000 - 9999)
4.5.1 Saving measured data
You can save measured data as follows:
1 Start the saving of the current measured value with < M >.
The memory number of the next free memory location is displayed
under the current measured value.
The
s status indicator appears.
2 Switch to the display of the ID number with < g >.
The ID number that was last entered appears on the display.
3 Edit the four-digit ID number as necessary with < 5 > and < 6 > [<ID
number>].
4 Using < < > and < > >, enter the required ID number (0 ... 9999).
The selected display flashes.
5 Confirm the ID number with < g >.
6 Save the measurement data set with < g >.
or
Cancel the storing procedure without storing by pressing <
E >.
CLR
Day.Month
MEM
CAL
C
pH
8
LoBat min:s Lap
mV
h:min
RESET
LAP
ESC
7 0 0
1
d
Ident
0 0 0