Xylem VARIO WATERPROOF PH METER - Manual (Page 21)

VARIO pH Operation
21 ba75373e04 07/2006
Note
The meter automatically recognizes a temperature sensor. The display
accuracy of the temperature indicates whether or not a temperature sensor
is connected:
Changing the
temperature unit
You can switch the temperature display from °C to °F:
Manual
temperature input
If you have connected an electrode without temperature sensor to the
adapter:
Note
When calibrating without a temperature sensor set the current temperature
of the respective buffer solution manually as well.
Display accuracy of
the temperature (°C or °F) Temperature sensor
connected?
0,1 yes
1 No
1 Toggle the display between °C and °F with < §_ > [<Temperature>].
1 Measure the temperature of the measuring solution using a
thermometer.
2 Activate the temperature input with < § > [<Temperature>].
The display flashes.
3 Set the temperature of the measuring solution with < > > and < < >.
4 Confirm the setting with < g >.
2
MEM
CAL
pH
8
8
LoBat Day.Month min:s Ident Lap
mV
h:min
CLR
RESET
LAP
ESC
C
7 0 0
5 2
d