Xylem VARIO WATERPROOF PH METER - Manual (Page 11)

VARIO pH Commissioning
11 ba75373e04 07/2006
If you do not wish to measure immediately, put the watering cap on the short
pH electrode (see section 5.4).
4 Place the short pH electrode in a straight position to the meter (turn
the wide cut-out to the front) and plug it in carefully with slight force.
5 Screw the short pH electrode tight using the coupling ring.
The meter is ready for operation.
h:min
1
CLR
LoBat Day.Month min:s Ident Lap
mV
pH
8
RESET RESET
LAP
SenT
ix
V