Xylem VARIO WATERPROOF PH METER - Manual (Page 38)

Operation VARIO pH
38 ba75373e04 07/2006
4.9 Reset
The following measurement parameters are reset to the delivery status:
Note
The calibration data gets lost when the measurement parameters are reset.
Recalibrate after performing a reset. Stored data are retained.
Resetting the
measurement
parameters
Parameter Default settings
Measuring mode pH
Asymmetry 0 mV
Slope -59.2 mV/pH
Calibration procedures TEC
Temperature, manual 25 °C
1 Using < C_ >, start the INIT initialization menu.
2 Using < < > or < > > or < § >, select YES for initialization.
3 Confirm with < g >.
The reset is performed.
The meter switches to the setting of the calibration interval. The
display flashes. You can change the calibration interval (see section
4.4.3) or switch to the measured value display with <
E >.
0
d
Ident
CLR
Day.Month
MEM
CAL
C
pH
LoBat min:s Lap
mV
h:min
RESET
LAP
ESC
n i t
S E y
I