Xylem VARIO WATERPROOF PH METER - Manual (Page 15)

VARIO pH Commissioning
15 ba75373e04 07/2006
3.4.3 Electrode with S7 connector
Electrodes with a plug head connector can be connected directly to the S7
adapter or, via a cable, to the DIN adapter of the VARIO pH.
Direct connection Connect the electrode directly as follows:
Connection with
cable
Depending on the electrode used, it is connected to the VARIO pH via a
cable as described in section 3.4.1 or section 3.4.2.
Note
When using an electrode without temperature sensor it is possible to connect
an external temperature probe (see section 3.4.4).
1 Connect the plug head adapter to the meter (see section 3.4.1).
2 Plug the electrode directly on the plug-in adapter.
2
h:min
1
CLR
LoBat Day.Month min:s Ident Lap
mV
pH
8
RESET
LAP
2 5
7 9 4
ESC
d
CAL
MEM
C
S7 Adaptor
plug head of electrode