Xylem WQL-pH pH DATALOGGERS - Manual (Page 62)

Resetting the logger WQL-pH
136 ba75821e01 10/2009
10 Resetting the logger
You can reset to the default condition the logger and the PC program with its
settings.
In the default condition, the settings are as follows:
Resetting to
default condition
To reset the logger and PC program to the default condition, proceed as
follows:
Configuration parameters Setting
Logging interval 1 second
Start of the logging Logger key button
End of the logging Time period
1 hour
Measured value ID None
Measuring mode pH
Date, time 01.01.2008, 00:00
Calibration Default values
(Nernst slope = -59,2 mV/pH
at 25 °C, asymmetry = 0 mV)
1 In the Device menu, click the menu item, Reset. A security prompt
appears.
2 Confirm with OK. The settings are reset to the default condition.