Xylem WQL-pH pH DATALOGGERS - Manual (Page 48)

Logging WQL-pH
122 ba75821e01 10/2009
7.5 Reading in data
Depending on the logging job, the WQL-pH logger measures for a certain
period of time and at certain intervals the pH value or mV value and the
temperature of a solution. The data is stored in the logger. The WQL-Log PC
program has to read in and store in a database the data before the data can
be displayed and processed.
To read in the data of the logging job, proceed as follows:
Note
If the logger contains new data, the prompt to read in the data appears
automatically when the logger is connected to the PC program. If data stored
in the logger are not read in, the logger cannot be connected to the PC
program (data protection!).
1 Connect the WQL-pH logger to the PC with the USB cable.
2 Start the WQL-Log program.
The Login window appears.
3 Confirm with OK. The WQL-Log program searches for the connection
with the logger.