Xylem WQL-pH pH DATALOGGERS - Manual (Page 44)

Logging WQL-pH
118 ba75821e01 10/2009
9 In the Device menu, select the menu item, Set up logging job. A note
on calibration appears.
10 Confirm with OK. The Logging tab appears, the first tab of the
window, Set up logging job.
11 Interval: To set the logging interval, click the arrow on the right side
of the setting field. A drop-down menu appears with the possible
intervals. Select the required interval with a mouse click.
12 Start: To set the start of the logging, click the arrow on the right side
of the setting field. A drop-down menu appears with the starting
times. Select the required starting time with a mouse click.
13 Stop: To set the end of the logging, click the arrow on the right side
of the first setting field. A drop-down menu appears with the possible
settings. Select the required starting time with a mouse click. If Time
period was selected:
14 To set the time period of the logging, click the arrow on the right side
of the second setting field. A drop-down menu appears with the
possible time periods. Select the required time period with a mouse
click.