Xylem WQL-pH pH DATALOGGERS - Manual (Page 13)

WQL-pH Commissioning
87 ba75821e01 10/2009
After the battery has been inserted the signal LED flashes once per second.
This means the logger has to be connected with the PC to set the date and
time (see section 7.3 S
ETTING THE PARAMETERS AND STARTING THE LOGGING
JOB and section 7.4 S IGNAL LED TO INDICATE THE OPERATING CONDITIONS OF
THE LOGGER ).
5 Screw on the sleeve and cap again. In the screwed condition, no gap
may be visible at the joints.