Xylem CHATTER Notification System configuration guide - Manual (Page 34)

MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
34
The folder must exist, it will NOT be created by
SCADA plug-in.
The value is a string representing a fully qualified file name:
Example, located on a local hard disk:
c:\csv\tempdata.txt
Example, located on a network share:
\\Server1\csv\tempdata.txt
Key Description
cnsICSVcontent This key describes to values used internally by SCADA plug-in, used to identify
the actual measurement.
Do not change the values in this key without
consulting MJK Automation ApS!
Example:
csvChatterIdentification = cnsIDTag
cnsMeasuredValue = cnsValue
Key Description
cnsFieldDelimiter This key describes which character is used to separate fields in the file with
comma-separated values, delivered to the SCADA-system
The value is a single character, the value depends on the type of SCADA-system,
you will supply data to.
Example:
;
Key Description
cnsDecimalDelimiter This key describes which character is used to separate the integer and the
fraction part of decimal values in the file with comma-separated values, delivered
to the SCADA-system
The value is a single character, the value depends on the type of SCADA-system,
you will supply data to.