Detailed configuration, General, Scada plug-in – Xylem CHATTER Notification System configuration guide User Manual
Page 15: Stormflow plug-in, 2;m;1;0;m
MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
15
Detailed configuration
General
Step
Desription
1
Configure the Chatter Notification Engine to use the correct database.
Information about setting up the engine are found in
.
2
Define at least one rule in the configuration file cnsRulesEngineGlobalConfig.xml.
Information about how to set up rules are in
.
SCADA plug-in
Step
Desription
1
Create at least one rule in the range 0 - 1999 the configuration file
cnsSCADAplugInGlobalConfig.xml.
Information about how to set up rules are in
.
2
Create a corresponding entry in the cnsSCADAobjects table in the database
Information about how to create and name objects in the database are in
3
Configure the SCADA plug-in to deliver its output data in a place to suit your needs
Information about how to configure this are in
STORMFLOW plug-in
Step
Desription
1
Create at the
2;M;1;0;M;
rule in the configuration file
cnsRulesEngineGlobalConfig.xml.
Information about how to set up rules are in
.
2
Create the necessary entries in the cnsSCADAobjects table in the database
Information about how to create and name objects in the database are in
3
Configure the STORMFLOW plug-in settings to suit your needs.
Information about how to configure this are in
22
16
16
39
29
16
39
37