Xylem CHATTER Notification System configuration guide - Manual (Page 18)

MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
18
1003; Chatter
measurement or alarm to the file with comma-separated values.
1004; Database
the file with comma-separated values.
1005; Database
Logger to the file with comma-separated values.
1006; Database
Logger is located to the file with comma-separated values. Used mostly at
waterworks.
1007; Database
Data Logger to the file with comma-separated values.
1008; Database Output the name from the middle level in the location for the current MJK
1009: Database Output the name from the lowest level in the location for the current MJK
1010; Database
with comma-separated values.
1011; Database Output the signal type which is the origin of the data to the file with comma-
separated values.
1012; Database Output the signal number which is the origin of the data to the file with comma-
separated values.
1013; Database
with comma-separated values.
1014; Database
file with comma-separated values.
1015; Database
Logger to the file with comma-separated values.
1016; Database
file with comma-separated values.
1017; Database
the file with comma-separated values.
1018; Database
the file with comma-separated values.
1019; Database Output the flag telling if Minimum Threshold is enabled in the current MJK
1020; Database Output the flag telling if Maximum Threshold is enabled in the current MJK
1021; Database
with comma-separated values.
1022; Database
comma-separated values.
1023: Database
server to the file with comma-separated values.
1024; Chatter
Data Logger converted from mV to V to the file with comma-separated values.
1025; Chatter Output the GSM signal strength converted to dBm as recorded for the current