YSI pHotoFlex Series - Manual (Page 37)

37 ba76126e01 03/2013
Note: Before using the test with your photometer for the first time, determine the reagent blank
value.
YSI model no.: Fe-1 TP
Category: RT (reagent test)
Cell: 28 mm
Measuring range: 0.012 - 1.800 mg/l Fe
Display in mmol/l possible
Pipette 10.0 ml of sample
into the empty cell. Add the contents of a
VARIO Iron TPTZ F10
powder pack and close
the cell with the screw
cap. To dissolve solids, shake
the cell vigorously for
approx. 30 seconds. Allow to react for 3
minutes (reaction time). Insert the cell in the
photometer cell shaft
and start measurement.
Notes:
• We recommend to determine a new reagent blank value (deionized water instead of sample) for each test package started.
3:00
Iron vario TPTZ
Program no.
300
*RN300*