YSI pHotoFlex pH Handheld Colorimeter - Manual (Page 26)

Operation pHotoFlex
®
pH
26 ba76123e01 02/2013
After a fall of the supply voltage (empty batteries or rechargeable bat-
tery), the date and time are reset to 01.01.2003, 00:00 hours.
Setting the date, time
and date format
The data format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
In the case of wrong entries, you can cancel the procedure with
.
After canceling with , it is possible to enter all digits once
again. The new digits are only taken over by confirming with
.
1 In the measured value display:
Open the Configuration menu with
The instrument is in the configuration mode.
2 Select and confirm the System / Continue ... / Date/time menu
with <> <> and .
3 Select and confirm the Time menu with <> <> and
.
A display for the entry of numerals with the number keys opens
up.
4 Enter the time using the number keys.
The digit to be changed is displayed underlined.
5 Confirm the setting with .
The time is set.
Time : 14:53:40
Date : 30.10.03
Date format : dd.mm.yy
Date/time
14:53:40
Time