YSI IQ S ENSOR N ET TriOxmatic 702 IQ - Manual (Page 12)

Commissioning TriOxmatic
®
702 IQ
3 - 2 ba76048e01 01/2012
Connecting the sensor
to the sensor
connection cable
Fig. 3-1 Connecting the sensor
1 Take the protective caps off the plug connections of the sensor
and the SACIQ sensor connection cable and keep them safe.
2 Plug the jack of the SACIQ sensor connection cable onto the
plug head connector of the sensor. At the same time, rotate the
socket so that the pin in the plug head connector (1) clicks into
one of the two holes in the jack.
3 Then, screw the coupling ring (2) of the sensor connection
cable onto the sensor up to the stop.
SACIQ
1
2