Xylem HandyLab 100 - Manual (Page 46)

Operation HandyLab 100
46 ba77062d01 03/2014
4.5 Data memory
You can transmit measured values (datasets) to the data memory:
 Manual storage (see section 4.5.1)
Measurement dataset A complete dataset consists of:
 ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor or manually
set temperature
 AutoRead info: AR appears with the measured value if the
AutoRead criterion was met while storing (stable measured value).
Otherwise, the AR display is missing.
 Calibration evaluation: +++, ++, +, -, or no evaluation
Storage locations The HandyLab 100 meter has a measurement data memory.
4.5.1 Manual storage
You can store a measurement dataset to the data memory as follows.
Data memory Maximum number of datasets
Manual data storage 500
1 Press the key shortly.
The menu for manual data storage appears.
2 If necessary, change and confirm the ID number (1 ... 10000)
with <
><> and .
The dataset is stored. The meter switches to the measured
value display.
30.10.2008 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 From 500
15.03.2014
010:00
Back