2 navigation, Navigation, Section 4.2.2 – Xylem HandyLab 100 User Manual
Page 17
HandyLab 100
Operation
17
ba77062d01
03/2014
4.2.2
Navigation
Measured value display
In the measured value display, you can
open the menu for calibration and measurement settings with
(short keystroke)
open the system menu with the sensor-independent settings by
pressing
_
>long keystroke,
approx. 2 s).
change the display in the selected measuring screen (e. g. pH <->
mV) by pressing
Menus and dialogs
The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the <
><> keys. The current
selection is displayed with a frame.
Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
ple:
Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
Subsequently, the setting can be changed with <
><> and
General
Clock
Service information
Reset
System
15.03.2014
010:00
Back
Language:
Deutsch
Illumination
:
On
Contrast
:
50 %
Switchoff time
:
1 h
General
15.03.2014
010:00
Back