Xylem HandyLab 100 - Manual (Page 22)

Operation HandyLab 100
22 ba77062d01 03/2014
4 Change and confirm the setting with < ><> and .
The minutes are highlighted.
5 Change and confirm the setting with <
><> and .
The seconds are highlighted.
6 Change and confirm the setting with < ><> and .
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 If necessary, select and set the Date with <
><> and
.
9 To make further settings, switch to the next higher menu level
with [Back].
or
Switch to the measured value display with .
The instrument is in the measuring mode.
Date format : dd.mm.yyyy
Date : 30.10.2008
Time : 14:53:40
Clock
15.03.2014
010:00
Back