Xylem CG 853 User Manual

Page 50

Operation

124

4.4.4 Clearing the storage

This function can erase the stored data records. 200 mem-
ory locations will then become available again.

Note
The

Clear store

function only appears if data records have

already been stored in the storage. Otherwise, the conduc-
tivity meter automatically changes to the measuring mode.

In order to delete all the data records, proceed as follows:

Note
The calibration data remain in the storage and can be called
up via the calibration protocol.

1 Switch off the instrument.

2 Press and hold down the key.

3 Press the key.

The

display test

appears briefly on the display.

4 Confirm the clearing process by pressing

.
Pressing any other key stops the clearing process
and the data records remain in the storage.