Xylem CG 853 - Manual (Page 33)

Operation
107
Setting up the cell
constant manually
To set up the cell constant manually, proceed as follows:
Note
1 Press the key repeatedly until LF CELL ap-
pears on the display.
2 Press the key.
3 Press the key repeatedly until the cell con-
stant to be set, e. g. 0.475 cm
-1
is displayed.
4 Set up the cell constant to be used by pressing
< ▲ > < ▼ >, e. g. 0.614 cm
-1
.
5 To return to the measuring mode: press the <
ì
> key.