Xylem CG 853 - Manual (Page 44)

Operation
118
Note
The
AutoStore function is interrupted if you perform other
functions, e.g. output data storage.
After completing the other function, the
AutoStore function
continues. However, as a result, gaps can occur in the
recording of the measured values.
Switching off the
AutoStore
Switch off the AutoStore function by:
l Setting the storage interval (Int 1) to OFF or
l Switch the conductivity meter off and on again.
4.4.3 Outputting the data storage
The contents of the data storage can be output to the:
l display
l interface
1 Press the key repeatedly until Sto disp ap-
pears on the display.
2 Press the key.
A measured value appears on the display.
The I. D. number of the data record appears for ap-
prox. 2 s.
Outputting to the
display