Xylem CG 853 - Manual (Page 19)

Commissioning
93
3 Commissioning
Perform the following activities for initial comissioning:
l Set the date and time
l Connect the plug-in power supply (option).
1 Press and hold down the <
ì
> key.
2 Press the key.
The display test appears briefly on the display.
The measuring instrument then switches automati-
cally to the setting of the baud rate.
3 Press the key repeatedly until the date
flashes on the display.
4 Set today’s date by pressing < ▲ > < ▼ >.
5 Confirm with .
The date (month) flashes on the display.
6 Set the current month by pressing < ▲ > < ▼ >.
7 Confirm with .
The year appears on the display.
8 Set the current year by pressing < ▲ > < ▼ >.
9 Confirm with .
The hour field flashes on the display.
10 Set the current time by pressing < ▲ > < ▼ >.
11 Confirm with .
The minutes field flashes on the display.
12 Set the current time by pressing < ▲ > < ▼ >.
13 Confirm with . The measuring instrument
then switches to the measuring mode.
14 Switch off the instrument by pressing .
Setting the date
and time