Xylem CG 853 - Manual (Page 30)

Operation
104
Note
If error message
appears see chapter 6 W HAT TO DO IF ...
AutoRead During calibrating, the AutoRead function is automatically
activated. The AR display flashes. The calibration procedure
is finished when the AR display stops flashing.
4 Immerse the measuring cell into the 0.01 mol/l KCL
control standard.
5 Press the key.
– If no temperature probe is connected, enter the
current temperature of the solution using < ▲ > < ▼ >
and confirm with
– If a temperature probe is connected, the AR
measurement to determine the cell constant starts.
flashes until a stable signal is achieved. The
determined cell constant ist displayed; the
measuring instrument automatically stores the cell
constant.