Xylem CG 853 - Manual (Page 46)

Operation
120
Note
If you want to find a specific parameter (e.g. date), proceed
as follows:
1 Press the key repeatedly until Sto disp ap-
pears on the display.
2 Press the key.
A measured value appears on the display.
The I. D. number of the data record appears for ap-
prox. 2 s.
3 After 2 s the respective temperature of the data
record appears on the display.
4 Select the parameter (e.g. date) by pressing
.
5 Press < ▲ > or < ▼ > repeatedly until the required date
appears on the display.
After approx. 2 s, the temperature of the displayed
measured value appears.