Bell & Gossett HS 213B Series B2 Inverted Bucket Steam Trap Service Parts - Manual (Page 3)

3
a. Carefully remove old gasket material from the
body (G). Do not scratch gasket surface area.
G
STEP 2 - Install New Service Part
If you are installing a: COVER ASSEMBLY
b. Install a new gasket (H) on the body (G).
c. Place the new cover assembly (J) on the
gasket (H).
J
H
G
d. Reinstall the (6) six cover bolts (E) and tighten
them to a torque of 22 ft•lb (30N•m).
e. Proceed to Step 3 – Return Trap to Service.
E (x6)