Asus P5Q3 - Manual (Page 150)

4-38 Chapter 4: Software support
Using Drive Xpert function in Express Gate environment
You may use Drive Xpert function in Express Gate environment by preparing only
two hard disks.
For Express Gate environment, you need to install Express Gate on a USB flash
install Express Gate on a USB flash
disk drive using another computer. using another computer.
Follow below instructions to complete the installation:
1. Plug a USB flash disk drive in a
computer with OS already installed.
2. Refer to the Express Gate installation Refer to the Express Gate installation
on page 4-39. Ensure to select select USB
as the target disk volume when hen
the Choose target volume screen
appears.
3. Plug the USB flash disk drive
installed with Express Gate to the
motherboard. Restart the system,
and launch the Express Gate.
Launching Drive Xpert
1. Click to launch the ASUS Utility Panel.
Using Drive Xpert function in BIOS setup environment
You may use Drive Xpert function in BIOS setup environment. Refer to
section 3.8 Tools menu for details.
Launch ASUS Utility Panel
• EZ Backup / Super Speed might erase all original data in both hard disks.
Ensure that you have back up all your data in your hard disks before using
the Drive Xpert function.
• When the operating system is already installed in one of the hard disks
connected to the SATA_E1 (orange, port 0) or SATA_E2 (white, port 1)
connectors, Drive Xpert cannot be configured for system safety. In this
case, proceed with mode change in BIOS setup environment if necessary.
2. Launch Drive Xpert from the ASUS Utility Panel. Refer to pages 4-36
and 4-37 for Drive Xpert configuration.