Asus P5Q3 - Manual (Page 131)

ASUS P5Q3 4-19
Digital Output
To set the digital output options
1. Click the
Digital Output tab.
2. Click Set Default Device to set the
digital output port as the default audio
output device.
3. Click the Sound Effects sub-tab for
options on changing the acoustic
environment and karaoke settings, or
click the Default Format sub-tab for options on changing the default
audio output format.
4. Click OK to effect the Digital Output settings and exit.
Speakers
To set the speakers options
1. Click the
Speakers tab.
2. Click Set Default Device to set the
analog ports as the default audio
output device.
3. Click the Speaker Configuration sub-
tab for audio channel options and test.
4. Click the Sound Effects sub-tab for
options on changing the acoustic environment and karaoke settings.
5. Click the Room Correction sub-tab for individual speaker distance
adjustment.
6. Click the DTS UltraPC sub-tab to turn on/off the DTS UltraPC feature.
7. Click the Default Format sub-tab for options on changing the default
audio output format.
8. Click OK to effect the Speakers settings and exit.
Configuration options
Click any of the tabs in this area to configure your audio settings.
The Configuration options shown in this section are for reference purposes
only and may not exactly match what you see on your screen. In the Windows
Vista™ environment, Realtek HD Audio Manager automatically detects devices
connected to the analog/digital ports and shows corresponding configuration
options tabs.
Connector settings
Click the Connector Settings button
( ) to show further settings for the
analog/digital output/input ports.