Asus N4L-VM DH - Manual (Page 142)

5 - 3 6 5 - 3 6 5 - 3 6 5 - 3 6 5 - 3 6 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
5.4.3 5.4.3 5.4.3 5.4.3 5.4.3 JMicron JMicron JMicron JMicron JMicron ® ® ® ® ® RAID Configuration RAID Configuration RAID Configuration RAID Configuration RAID Configuration
The JMicron ® Serial ATA controller allows you to configure RAID 0 and RAID
1 sets on the external Serial ATA hard disk drives.
Before creating a RAID set Before creating a RAID set Before creating a RAID set Before creating a RAID set Before creating a RAID set
Prepare the following items:
1. At two HDDs, preferably with the same model and capacity.
2. A white floppy disk
3. Microsoft ® Windows ® OS installation disk (Windows 2000/XP/2003)
4. Motherboard support CD with JMB363 driver
Complete the following steps before you create a RAID set:
1. Install the external Serial ATA hard disk drives (HDDs) on your system.
2. Set the O O O O O n b o a r d J M B 3 6 3 S e r i a l - A T A n b o a r d J M B 3 6 3 S e r i a l - A T A n b o a r d J M B 3 6 3 S e r i a l - A T A n b o a r d J M B 3 6 3 S e r i a l - A T A n b o a r d J M B 3 6 3 S e r i a l - A T A item in the BIOS to
[RAID]. See section “4.4.4 Onboard Devices Configuration” for details.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Configure Win627EHF Super IO Chipset
Onboard JMB363 Serial-ATA [RAID]
Onboard PCIEX GbE LAN [Enabled]
LAN Option ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Onboard Game/MIDI Port [Disabled]
Onboard 1394 Controller [Enabled]
Onboard JMB363 Serial-
3. Enter the JMB363 RAID BIOS utility to set up your RAID configuration.
4. Create a JMB363 RAID driver disk for Windows ® OS installation. See
section “5.5 Creating a RAID driver disk” for details.
5. Install the JMB363 driver after the Windows ® OS had been installed.