Asus N4L-VM DH - Manual (Page 55)

A S U S N 4 L - V M D H A S U S N 4 L - V M D H A S U S N 4 L - V M D H A S U S N 4 L - V M D H A S U S N 4 L - V M D H 2 - 3 3 2 - 3 3 2 - 3 3 2 - 3 3 2 - 3 3
1 3 . 1 3 . 1 3 . 1 3 . 1 3 . ATX power connectors (24-pin EATXPWR, ATX power connectors (24-pin EATXPWR, ATX power connectors (24-pin EATXPWR, ATX power connectors (24-pin EATXPWR, ATX power connectors (24-pin EATXPWR, 4 4 4 4 4 -pin ATX12V) -pin ATX12V) -pin ATX12V) -pin ATX12V) -pin ATX12V)
These connectors are for ATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
• For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version).
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
• Visit www.asus.com for the latest power requirements table.
®
N4L-VM DH
N4L-VM DH ATX power connectors
EATXPWR
ATX12V
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
+12V DC
GND
GND
+12V DC