Asus M2V-MX SE - Manual (Page 74)

2-32 Chapter 2: BIOS Setup
Power On By PME [Disabled]
When this item is set to [Enabled]. A PME (Power Management Event) can turn on
the system. Configuration Options: [Disabled] [Enabled]
Power On By KBC [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Wake-Up Key [Any Key]
Allows you to assign a key to resume the system. When this item is set to
[Specific key], it allows you to set wake-up password.
Configuration Options: [Any Key] [Specific Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to
resume the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
The following item is active when the Power On By KBC item is set to [Enabled].