Asus M2V-MX SE - Manual (Page 34)

1-24 Chapter 1: Product introduction
7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
9. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or
other VGA-compatible devices.
10. COM port. This 15-pin port is for a VGA monitor or other VGA-compatible
devices.
11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1.10.2. Internal.connectors
1.. Floppy.disk.drive.connector.(34-1.pin.FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
M2V-MX.SE
R
M2V-MX SE Floppy Disk Drive Connector
PIN
1
FLOPPY
NOTE: Orient the gray markings on
the floppy ribbon cable to PIN 1.