Asus M2V-MX SE - Manual (Page 65)

ASUS M2V-MX SE 2-23
Memory.Controller
Memory Controller
Memory Configuration
ECC Configuration
Power Down Control [Auto]
Memory CLK :667 MHz
CAS Latency(Tcl) :5.0
RAS/CAS Delay(Trcd) :5 CLK
Min Active RAS(Tras) :15 CLK
Row Precharge Time(Trp) :5 CLK
RAS/RAS Delay(Trrd) :3 CLK
Row Cycle (Trc) :21 CLK
Asynchronous Latency :6 ns
Memory Configuration
Memclock Mode [Auto]
CAS Latency(CK) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Memory Configuration
Memclock Mode [Auto]
Allows you to set the memory clock mode.Set by the code using
[Auto] or select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Manual] [Limit]
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0]
2.4.3. Chipset
The items in this menu allows you to change the chipset-related features. Select
an item then press to display the configuration options.
Advanced Chipset Settings
Warning: Setting wrong values in below sections
may cause system to malfunction.
Memory Controller
AGP Bridge K8M890 AGP/PCI EXPRESS Congifuration
Southbridge VIA VT8237S Configuration
Hyper Transport Configuration