Asus CUA - Manual (Page 63)

ASUS CUA User’s Manual 63
4. BIOS SETUP
4. BIOS SETUP
Onboard AC-Link Audio Controller [Enabled]
[Enabled] allows you to use the onboard audio controller. If you want to use
an add-on audio card, set this field to [Disabled]. Configuration options:
[Disabled] [Enabled]
Onboard FDC Swap A & B [No Swap]
This field allows you to reverse the hardware drive letter assignments of
your floppy disk drives. Configuration options: [No Swap] [Swap AB]
Floppy Disk Access Control [R/W]
When set to [Read Only], this field protects files from being copied to floppy
disks by allowing reads from the floppy disk drive but not writes. The setup
default [R/W] allows both reads and writes. Configuration options: [R/W]
[Read Only]
Onboard Serial Port 1 [3F8H/IRQ4], Onboard Serial Port 2 [2F8H/IRQ3]
These fields allow you to set the addresses for the onboard serial connec-
tors. Serial Port 1 and Serial Port 2 must have different addresses. Configu-
ration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10]
[Disabled]
4.4.2 I/O Device Configuration
I/O Device Config