Asus CUA - Manual (Page 21)

ASUS CUA User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
CUA ®
CUA Input/Output Voltage Setting
Normal
(Default)
Reserved
1 2 2 3
VIO
4) Voltage I/O Setting (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
AGP, and PCI, among others. The default voltage is set at Normal.
Setting VIO
Normal [1-2] (default)
Reserved [2-3]
WARNING! Using a higher voltage may help when overclocking but may result in
the shortening of your computer component’s life. It is strongly recommended that
you leave this settting on its default.
5) BUS Selection (BS133)
This jumper allows you to enable support for the VIA Cyrix® III (133MHz
FSB) processor. The default is set at Normal for Intel and VIA Cyrix III (100/
66MHz FSB) processors. For VIA Cyrix III (133MHz FSB) processors, set the
BS133 jumper to [2-3].
Setting BS133
Normal [1-2] (default) [Intel and VIA Cyrix III (100/66MHz FSB)]
Reserved [2-3] [VIA Cyrix III (133MHz FSB)]
CUA Bus Selection
Normal
(Default)
BS133
1 2 2 3
CUA ®